Epygi QuadroCS SW-Version Installationsanleitung Seite 11
- Seite / 195
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
QuadroM32x/8L/26x/12Li/26xi Manual II: Administrator's Guide Administrator’s Menus
QuadroM32x/8L/26x/12Li/26xi; (SW Version 5.3.x)
11
The WAN IP Configuration page is only displayed if Ethernet or
PPTP has been selected to be the uplink protocol. It offers the
following components:
The Assign automatically via DHCP radio-button selection
switches to automatic retrieval of the WAN IP address from a DHCP
server at the ISP/uplink.
Please Note: DHCP referred to here is the one that runs on the
provider’s side and not the Quadro’s personal DHCP server.
The Assign Manually radio-button switches to the manual
adjustment of IP settings. This selec
tion requests the following
parameters:
IP Address requires the IP address for the Quadro WAN interface.
Subnet Mask requires the subnet mask for the Quadro device
WAN interface.
Default Gateway requires the IP address of the router where all
packets are to be sent to, for example, to the router of the provider.
Fig. II-9: Internet Configuration Wizard - WAN IP Configuration page
The WAN Interface Configuration page may be used to modify the
MAC address of the Quadro. This might be necessary if the ISP
(Internet Service Provider) requires a specified MAC address, for
example, for
authentication. This page offers the following
components:
MAC Address Assignment manipulation radio-buttons:
• This Device turns to the default MAC address of the Quadro.
• User Defined requires user defined MAC Address.
The MTU drop down list allows you to select the maximum packet
size on the Ethernet (in bytes). MTU is used to fragment the packets
before transmitting them to the network. The MTU preferred value is
dependent on the Ethernet connection. The default MTU size is
1500 Bytes for Ethernet and 1400 Bytes for PPPoE.
Fig. II-10: Internet Configuration Wizard - WAN MAC Address Configuration page
Automatic Provisioning
Automatic Provisioning provides the possibility to automatically
configure the WAN network settings of Quadro. This is very useful
when the administrator is not actually aware about the Quadro’s
network settings. Automatic Provisioning automatically detects the
matching network configuration settings, applies them on the
Quadro, thus connecting the device to the internet through the
available ISP connection.
Please Note: Automatic Provisioning can only be run from the
LAN side of the Quadro, i.e. from the PC connected to the Quadro’s
LAN.
After the confirmation, the Automatic Provisioning automatically
detects and configures the following settings on the Quadro:
• WAN interface type (PPPoE or Ethernet)
• WAN IP settings
• PPP settings
• ISP settings
• DHCP settings
• DNS settings
•
NAT Traversal settings
Fig. II-11: Auto Provisioning page
Needed Bandwidth for IP Calls
The bandwidth required by an IP call depends on the codecs used and these specifications are listed in the tables below:
- Edition 1, March 2014 1
- Table of Contents 2
- Quadro’s Graphical Interface 6
- Administrator’s Menus 8
- • System Language – 9
- • Medium 12
- System Security Management 12
- • User Rights Management 13
- • IP Line Settings 13
- • Firewall/NAT 13
- Memory Status 21
- Hardware Status 21
- IP Routing Configuration 23
- Configuration Management 24
- Fig. II-42 25
- Fig. II-44 26
- Time/Date Settings 29
- Mail Settings 29
- SMS Settings 30
- Firmware Update 31
- Automatic Firmware Update 33
- Networking Tools 34
- SNMP Settings 34
- Diagnostics 35
- System Logs 36
- Features 37
- Fig. II-66: Features page 38
- Redundancy Settings 41
- Users Menu 43
- Extensions Management 43
- User Extension Settings 45
- • Auto – 54
- ACD Group Extension Settings 58
- • Simple Local Mode 63
- Attendant Extension Settings 64
- • Redirection on Timeout 65
- • User Input 67
- • No input 67
- • Signs (“*” and “#”) 67
- Add Multiple Extensions 70
- Extension Codecs 71
- Recording Box 74
- Extensions Directory 79
- Authorized Phones Database 79
- Call Back Services 81
- ACD Management 82
- • Auto – 84
- / and 86
- Conference Statistics 88
- Mail Default Settings 90
- Telephony Menu 91
- Call Statistics 91
- RTP Statistics 94
- FAX Statistics 95
- SIP Settings 95
- NAT Traversal Settings 98
- • Automatic – 98
- IP Line Settings 101
- IP Phones Logo 106
- FXS Gateway Management 106
- Loopback Settings 107
- Hot Desking 107
- E1/T1 Settings 109
- ISDN Settings 119
- • PTP (Point to Point) 120
- Administrator’s Menus 121
- • on call acceptance 122
- External PSTN Gateways 124
- Gain Control 124
- SIP Tunnel Settings 125
- Call Routing 126
- • Daily 132
- Local AAA Table 133
- Global Speed Dial Directory 134
- Best Matching Algorithm 136
- • By prefix 140
- RADIUS Client Settings 140
- Voice Mail Common Settings 141
- Dial Plan Settings 142
- 3PCC Settings 142
- RTP Streaming Channels 142
- Call Recording Settings 143
- Recording Box 143
- Class of Service 144
- • Description 145
- Advanced PPP Settings 147
- VPN Configuration 147
- Dynamic DNS Settings 153
- Firewall and NAT 154
- • Low Security 155
- • High Security 155
- Advanced Firewall Settings 155
- Filtering Rules 155
- IP Pool 158
- IDS Log 159
- Network Menu 161
- DNS Settings 161
- DNS Server Settings 161
- DHCP Advanced Settings 163
- Registration Form 165
- Voice Mail Profiles 166
- Administrator’s Login 170
- Welcome 173
- Administrator Settings 174
- Extension Voice Mail 175
- Profiles 175
- Extension Settings 182
- Conference Menu 185
- Conference Progress 185
- Activate Conference 187
- Send Notification Mail 187
- Recorded Conferences 187
- or feature 188
- Participants 190
- Fig. II-17: Schedule Page 193
- EPYGI TECHNOLOGIES, LTD 194
- Software License Agreement 194
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.183 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern